Slat Conveyors

Product Details:

We offer slat conveyor having one or more endless chains to prevent overlapping and interlocking spaced slats. The slats are either of wood or flanged metal. Our slat conveyors are very useful for handling heavy loads of heated materials. end drive C Located at a discharge end of the conveyor. Chain guard located on left-hand side.

• Slats: Cold Formed steel slat, 5-3/4 in. x 1-1/2 in. x 7 gi channel.
• Chain: 4-6 in. pitch bushed roller steel chain with 2 in. Dia. high capacity roller bearing. BED 17 in. deep x 10 Ga. formed steel channel powder painted. Standard 5 ft. and 10 ft. long sections bolt together with butt couplings.
• Drive sprockets: 12 in. pitch dia. With 2-15/16 in. dia. shaft.
• Take-UP: Take-ups provided at tail sprockets. Provides 15-1/2 in. of chain take-up. BEARINGS Sealed, pre-lubricated, self-aligning, ball bearings at a drive and tail sprockets.
• Speed reduction: Heavy-duty sealed worm gear
• speed:C-Face speed reducer. No.100 roller chain to drive sprocket. Equipped with shear pin hub.
• Motor2 HP 230/440/460V 3 Ph. 50-60 Hz. Energy Efficient C-Face and MD65 AC variable speed controller with soft start capability and motor overload protection.
• Electrical controls Not furnished as standard equipment. See below.
• Conspeed: Constant 30 RPM.
• Capacity: Maximum load per linear foot of conveyor 1400 lbs. not to exceed capacity in the chart.
• Floor supports : Now supplied as optional equipment.